LM-8 Glacial Refrigerant
Composition and traits:
LM-8 glacial refrigerant is composed of modified organic
acid salt solution. The main additives include anti-corrosion agent, anti-mold
agent, solubilizer, stabilizer, etc. Appearance is light-colored liquid. At 20 ℃, the density is 1.334 ～ 1.360g / cm3, the specific heat is
0.622cal / g · ℃, the
viscosity is 2.9mPa · s (cP), and the thermal conductivity is 0.47W / m · K.
Boiling point is higher than 110 ℃, freezing
point is lower than -60 ℃, no flash
point, non-volatile, non-flammable, low toxicity.
Purpose and usage:
LM-8 glacial refrigerant has the advantages of safety,
low toxicity, non-volatile, non-flammable, large specific heat, high thermal
conductivity, high cooling capacity, good anti-rust performance and so on. It
can be used as a coolant in the temperature range of -50 ℃ ～ 100 ℃ instead of the traditional calcium chloride aqueous solution.
Before use, the system needs to be cleaned, and then
directly add LM-8 refrigerant, and it is forbidden to use it with other
refrigerants. After normal use, check the pH value every 3 months. If the pH
value is lower than the specified value, you should contact us in time for
adjustment.
